HUMAN REIGN

Human Reign Series Amp_Beauty and the Beast. An extreme departure from the norm in both appearance and performance, innovations in design and technology combine to produce an amplifier that will not only please the most eclectic art lover, but will produce enough audio power to satisfy the most stringent SPL freak...

FEATURES

Pure Class A circuitry
Fully regulated MOSFET power supply
RUBI™ (Rapid-Use Branched Impulse) Proprietary power supply topology
STACT™ (STabilized Apex Current Topology) Reduces power supply stress by 50%
Auto High Current™ Matches the amplifier for virtually every load application
Chassisink™ Semiconductors are situated between the circuit board and heatsink for optimal thermal transfer
Ultra-Low ESR Capacitance Bank ensures rapid power delivery for dynamic peaks
Triple Darlington output circuitry
Hawkins Bass Control™ Proprietary bass equalization topology
Harmonic Bass Alignment™ Produces tighter and more accurate bass
IDI™ (Intelligent Distress Indicator) Gives visual indication of amplifier protection status
Bi-Linear built-in selectable 2-way crossovers for amplifier and line output
4-Way protection topology - Thermal, DC Offset, Speaker Short and Reverse Polarity
Selectable Balanced line inputs for highest level of noise rejection

  Feature Human Reign 2 Human Reign 4
OUTPUT POWER: RMS/Chan @ 4 Ohms (Watts) 450 x 2 125 x 4
  RMS/Chan @ 2 Ohms (Watts) 800 x 2 250 x 4
  RMS Bridged @ 4 Ohms (Watts) 1600 x 1 500 x 2
T.H.D:.   <0.02% <0.02%
SIGNAL TO NOISE RATIO:   >90db >90dB
DAMPING FACTOR:   >500 >500
FREQUENCY RESPONSE:   10Hz - 40KHz 10 Hz - 40KHz
INPUT SENSITIVITY (VOLTS):   0.15 - 5.0 0.15 - 5.0
CONTINUOUSLY VARIABLE ELECTRONIC CROSSOVERS: Low-pass@24dB/octave(all channels) 40 - 160Hz 40 - 160Hz
  High-pass@12dB/octave(chans1&2) 50 - 500Hz 500 - 5KHz
  High-pass@12dB/octave(chans3&4) - 50 - 500Hz
HAWKINS BASS CONTROL
(SUBSONIC POSITION):		 Variable High Pass ( no boost) 13 - 30Hz 13 - 30Hz
  Variable Boost Frequency 30 - 70Hz 30 - 70Hz
HAWKINS BASS CONTROL CONTROL
(ON POSITION):		 Variable Bass Boost 0 - 9dB 0 - 9dB
REAR CHANNEL DE-EMPHASIS:   - 6dB@7KHz
DIMENSIONS (INCHES):   13.125x23.125x7.125 13.125x23.125x7.125
   

SPECIAL FEATURE XXX WOOFERS
Soundstream acoustical engineers along with DB Drag guru, Ronal Murphy developed the XXX-15 sub woofer to handle 8.5 kilowatts of power. This full-throttle innovation puts them in a class by themselves.
Our engineers use very high temperature glues along with a 4”, flat wound, copper
clad aluminum voice coil to keep them from critical mass melt down.
If you’re looking for sonic terror, you need to stack the deck with XXX.


 

 

  XXX-15
RMS POWER(WATTS): 8500
VOICE COIL DIAMETER (INCHES): 4.0
MAGNET STRUCTURE (OZ): 1150
FREQUENCY RESPONSE(Hz):.  21-983
SPL(dB):  89
HOLE SIZE (INCHES):  14.25
RECOMMENDED ENCLOSURE TYPE:  VENTED

                                                                                                                      
  Feature XXX-5000D
OUTPUT POWER: RMS/Chan @ 4 Ohms (Watts) 3400
  RMS/Chan @ 2 Ohms (Watts) 4800
  RMS Bridged @ 4 Ohms (Watts) 6500
T.H.D:.   1.0%
DAMPING FACTOR:   >350
FREQUENCY RESPONSE(Hz):   5-250
INPUT SENSITIVITY:   0.5-10 Volts
CONTINUOUSLY VARIABLE ELECTRONIC CROSSOVERS: LOW-PASS SLOPE 24dB
S/N RATIO:   >80dB
LOW-PASS FREQUENCY (HZ):   40-160
SUBSONIC FILTER SLOPE:   18dB
SUBWOOFER EQ @ 45Hz:   0-18dB

MARINE Series

Soundstream Wetware marine products are made from the finest materials available to fit the needs of both the weekend warrior to the serious boater. We build audio products specifically for marine application; we are not opportunists that just convert a car audio product and call it marine. All of our marine products pass the Salt/Fog test and are ready for the harsh elements that the oceans and lakes of the world have to offer.


Common Features
Input sensitivity: 100mV - 2V or 2V - 8V
Variable bass boost: 0 to +12dB
Trimode capable
Variable 18dB high & low pass crossover
Low level inputs
Low level outputs
High speed digital circuitry
Fully regulated PWM power supply
Four way protection circuit
Dash mount bass knob remote
Marine coated circuit board
All chrome plated

  MA340.2 MA640.4 MA700.2
NUMBER OF CHANNELS: 2 4 2
OUTPUT (WATTS):RMS @ 4 Ohms 85x2 85x4 175x2
RMS @ 2 Ohms 170x2 170x4 350x2
RMS Bridged @ 4 Ohms 340 X 1 340 X 2 700 X 1
T.H.D.: < 0.02% < 0.02% < 0.02%
Frequency Response (Hz): 10 - 50K 10 - 50K 10 - 50K
SIGNAL TO NOISE RATIO: > 100dB > 100dB > 100dB
DAMPING FACTOR: > 300 > 300 > 300
INPUT SENSITIVITY: 0.10 - 8.0 0.10 - 8.0 0.10 - 8.0
CROSOVER SLOPE: 12dB 12dB 12dB 
CROSSOVER FREQUENCY (HZ): 50Hz - 250kHz 50Hz - 250kHz 50Hz - 250kHz
DIMENSIONS (INCHES): 8.75x2x8.75” 8.75x2x11.5” 8.75x2x12.75”

 

MARINE SERIES SPEAKERS
Reproducing sound can be a very difficult task in a marine environment. That is why the Soundstream acoustical engineers have developed a new tweeter innovation called “Harmonic Induction Technology” or HIT in the Picasso full-range speaker line. We use this brand new tweeter technology to put the lost harmonics back into the upper range of your music all the way up to 50 kHz. The new HIT tweeter has a very warm and accurate sound reproducing the lost harmonics and frequency range due to prior material limitations with the key ingredient of the diaphragm called tantalum.


Common Features
Plastic Injection Molded UV Frame
Injection Molded Titan Cone
TPU Surrounds
HIT (Harmonic Induction Technology)
Tweeters
ASV Voice Coils
Element Coated Tinsel Leads
Plastic UV Magnet Covers
UV Tarantula Grills included
 






  MS.653 MS.693
RMS POWER(WATTS): 85 120
MAGNET WEIGHT (OZ): 12 22
FREQUENCY RESPONSE(Hz):. 70 - 20k 50 - 20k
VOICE COIL : 1” 1”
SENSITIVITY:  92dB 93dB
MOUNTING DEPTH (INCHES)  2.56 2.56


MARINE SERIES COMPONENTS ENCLOSURE
MPOD-1 Single 6.5” System w/ TRC.6 model
MPOD-2 Dual 6.5” System w/ TRC.6 model


Features:

Black Alumnium Cones
Butyl Rubber Surrounds
4 Ohm System Impedance
1.5” Silk Dome Tweeters
Neodymium Tweeter Magnets
150 Watts
SPL 92dB
Freq. Res. 72Hz - 22KHz
 








TARANTULA Series

When sound quality and performance is a must, the Tarantula is the most aggressive amplifier on the market today. The Tarantula amplifiers feature SMT Topology along with 3 to 1 power supply ratios that give the listener extreme amounts of headroom, speaker control and sonic accuracy.
When only the best will do, Tarantula is your first choice.
FEATURES

Variable hi pass, band pass, low pass
Variable 18dB bass boost
Double sided glass epoxy SMT circuit board
PWM mosfet power supply
Tri-guard amplifier protection
SMT cooling fan built in
Tri-mode capable
Line output



  TRA340.2 TRA560.2 TRA800.2 TRA1000.2
NUMBER OF CHANNELS: 2 2 2 2
OUTPUT (WATTS):RMS @ 4 Ohms 85x2 140x2 200x2 250x2
RMS @ 2 Ohms 170x2 280x2 400x2 500x2
RMS Bridged @ 4 Ohms 340 X 1 560 x 1 800 X 1 1000 X 1
T.H.D.: < 0.02% < 0.02% < 0.02% < 0.02%
Frequency Response (Hz): 10 - 50k 10 - 50k 10 - 50k 10 - 50k
SIGNAL TO NOISE RATIO: >115dB >115dB > 115dB > 115dB
DAMPING FACTOR: >500 >500 >500 >500
INPUT SENSITIVITY: 0.15 - 12.0V 0.15 - 12.0V 0.15 - 12.0V 0.15 - 12.0V
CROSOVER SLOPE: 12dB 12dB 12dB 12dB
CROSSOVER FREQUENCY (HZ): 50 - 5k 50 - 5k 50 - 5k 50 - 5k
DIMENSIONS (INCHES): 10.75x2.6x16 10.75x2.6x18 10.75x2.6x21.5 10.75x2.6x22.5

  TRA1400.2 TRA680.4 TRA960.4 TRA880.5
NUMBER OF CHANNELS: 2 4 4 5
OUTPUT (WATTS):RMS @ 4 Ohms 350x2 85x4 120x4 60x4+200x1
RMS @ 2 Ohms 700x2 170x4 240x4 120x4+400x1
RMS Bridged @ 4 Ohms 1400 X 1 340 x 2 480 X 2 240 X 2+400x1
T.H.D.: < 0.02% < 0.02% < 0.02% < 0.02%
Frequency Response (Hz): 10 - 50k 10 - 50k 10 - 50k 10 - 50k
SIGNAL TO NOISE RATIO: >115dB >115dB > 115dB > 115dB
DAMPING FACTOR: >500 >500 >500 >500
INPUT SENSITIVITY: 0.15 - 12.0V 0.15 - 12.0V 0.15 - 12.0V 0.15 - 12.0V
CROSOVER SLOPE: 12dB 12dB 12dB 12dB
CROSSOVER FREQUENCY (HZ): 50 - 5k 50 - 5k 50 - 5k 50 - 5k
DIMENSIONS (INCHES): 10.75x2.6x24.25 10.75x2.6x20 10.75x2.6x21.5 10.75x2.6x21.5